1K Dispensing System for Lubricants and Sealants

PAR 20F & PAR 200F

1K Dispensing System

Whether you are looking to process one-component silicone, polyurethane, epoxy or grease, the METER MIX® PAR 20F and PAR 200F are economically convincing, highly-efficient 1K dispensing systems. The machines are specially developed for applications such as cartridge/syringe filling, grease dispensing or thermal paste dosing. The PAR 20F & PAR 200F machines incorporate a lift/ram assembly with built-in follower seal plate to enable high-viscosity materials to be processed directly from the suppliers container. In addition, these machines can also be interfaced with automated systems for fully or semi-automatic applications.

Typical Applications

    • Cartridge/Syringe filling
    • Grease Dosing
    • Thermal Paste Metering

    Typical Materials

      • Silicone
      • Polyurethane
      • Epoxy
      • Grease

      Technical Data

        PAR 20F & PAR 200F
      Viscosity acceptance Up to 1,500,000 mPa.s
      Shot size Available from approx. 5ml up to 175ml (depending upon model & pump size selection)
      Cycle Rate Up to 15 shots per minute
      (depending upon viscosity)
      Major component drum/pail size approx. 20 lt (5,27 gal), depending upon drum dimensions)
      Drum/pail size PAR 20F: approx. 20 lt (5,27 gal), depending upon drum dimensions
      PAR 200F: approx 200lt (52,63 gal)

      Standard Features

      • Floor mounted machine (PAR 200F) with castors for portability (PAR 20F)
      • Metering Pump: Single acting positive displacement
      • Outlet Valve: Pneumatically operated AST6001 Tipseal Valve
      • “Metered” or “Operator Controlled” shot size selection
      • Service indicator lamp
      • Controls:
        • Integrated PLC control with HMI operator interface
        • Manual shot size adjuster with digital reference indicator
        • Dispense pressure regulator and gauge
        • Air supply filter/regulator and gauge with connection check unit
        • Main Off/On switch
        • Emergency Stop & Reset Buttons
        • Shot counter/repeater unit for multiple shot applications
        • Either foot pedal or hand held trigger start options available
        • 230v AC electric supply + compressed air @ 80 p.s.i.

      Available Options

        • Digitally controlled heating to follower plate, pump and hose
        • Electronic low-level sensing with visual and audible alarms
        • Stainless steel wetted parts to protect against corrosion
        • Hardened parts to protect against abrasion
        • Swiveling boom assembly to support hand held mixer valve

        Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further Information